YASKAWA MH SIGMA-5 Series - Page 57

5-4
162068-1CD
162068-1CD
MH-SERIES
POSITIONER
5 Tooling Recommendations
5.1 Headstock Only – Tooling Recommendations
Fig. 5-42: Mounting Holes on Faceplate MH3105
0.0
0.0
DIA. 120 THRU
M16 X 2 THRU
225.0 MM
274.5 MM
30 MM
TYP.
TYP.
12.5 MM
4 X M10 1.5 THRU
2 X M12 THRU
225.0 MM
194.9 MM 194.9 MM
112.5 MM 112.5 MM
225.0 MM
194.9 MM
112.5 MM
225.0 MM
194.9 MM
112.5 MM
5 MM DEEP
200 MM
284.5 MM
264.5 MM
TYP.
57/101