9.7 Interference Area
9-30
9.7.4 Clearing Interference Area Data
Operation Explanation
1 Select interference signal for
clearing.
Select the desired interference signal number for clearing using
the page key or by number input.
The method for number input is as follows: Move cursor to the
signal number and press [SELECT] to display the number input
line. Input desired signal number and press [ENTER].
2 Select {DATA} under the
menu.
3 Select {CLEAR DATA}. The confirmation dialog box is shown.
4 Select “YES.” All the data of the interference signal number are cleared.
PAGE
GO BACK
Yes
No
Initialize?
Main Menu ShortCut
EDIT
DISPLAY
UTILITY
DATA
METHOD
CONTROL GROUP
CHECK MEASURE
COMMAND POSITION
AXIS INTERFERENCE
INTERFERENCE AREA
INTERFERENCE SIG:
1 / 32
<MAX> <MIN>
Move to center point and teach
R1
DIRECT PAGE
To Next Page
Loading...
