9.14 Numeric Key Customize Function
9-81
9.14 Numeric Key Customize Function
9.14.1 What is the Numeric Key Customize Function?
With this function, the user can set the function of an application that has been allocated to the
Numeric key of the programming pendant to the other function.
Since any frequently used operation can be allocated to a Numeric keys on the programming
pendant, decreasing the number of key operations reduces the teaching time.
9.14.2 Allocatable Functions
There are two allocation methods as follows:
• Key Allocation (EACH)
• Key Allocation (SIM)
Key Allocation (EACH)
With key allocation (EACH), the manipulator operates according to the allocated function
when the Numeric key is pressed. The following shows the functions that can be allocated.
The Numeric Key Customize Function is only valid when the security mode is set to the
management mode.
Function Description
Manufacturer
allocation
Allocated by Yaskawa. Allocating another function invalidates the func-
tion allocated by the manufacturer.
Instruction allocation Allocates any instructions assigned by the user.
Job call allocation Allocates job call instructions (CALL instructions). The jobs to be called
are only those registered in the reserved job names. (Specify it by the
registration No.)
Display allocation Allocates any displays assigned by the user.
NOTE
To Next Page
Loading...
