9.18 File Initialize
9-105
9.18.5 Initializing System Data
Operation Explanation
1 Turn the power supply ON
again while pressing [MAIN
MENU] simultaneously.
2 Change the security mode to
management mode.
3 Select {FILE} under the main
menu.
4 Select {INITIALIZE}.
5 Select {SYSTEM DATA}. The system data selection window is shown.
6 Select the parameter to be ini-
tialized.
The selected data is marked with “
“.
7 Press [ENTER]. The confirmation dialog box is shown.
8 Select “YES.” The selected data is initialized.
Main Menu ShortCut
EDIT
DISPLAY
UTILITY
DATA
INITIALIZE
USER WORD
SV MONITOR SIGNAL
VARIABLE NAME
SECOND HOME POSITION
HOME POS CALIB DATA
Maintenance Mode
WORK HOME POSITION DATA
UWORD .DAT
SVMON .DAT
VERNAME .DAT
HOME2 .DAT
ABSO .DAT
OPEORG .DAT
Main Menu ShortCut
EDIT
DISPLAY
UTILITY
DATA
Parameter marked by
can not be selected.
INITIALIZE
USER WORD
SV MONITOR SIGNAL
VARIABLE NAME
SECOND HOME POSITION
HOME POS CALIB DATA
Maintenance Mode
WORK HOME POSITION DATA
UWORD .DAT
SVMON .DAT
VERNAME .DAT
HOME2 .DAT
ABSO .DAT
OPEORG .DAT
YES NO
Initialize?
To Next Page
Loading...
