9.18 File Initialize
9-104
9.18.4 Initializing I/O Data
Operation Explanation
1 Turn the power supply ON
again while pressing [MAIN
MENU] simultaneously.
2 Change the security mode to
management mode.
3 Select {FILE} under the main
menu.
4 Select {INITIALIZE}.
5 Select {I/O DATA}. The I/O data selection window is shown.
6 Select data for initializing. The selected data is marked with “
“.
7 Press [ENTER]. The confirmation dialog box is shown.
8 Select “YES.” The selected data is initialized.
Main Menu ShortCut
EDIT
DISPLAY
UTILITY
DATA
INITIALIZE
CIO PRGM
IO NAME DATA
SIMULATED IN DATA
Maintenance Mode
CIOPRG .LST
IONAME .DAT
PSEUDOIN .DAT
Main Menu ShortCut
EDIT
DISPLAY
UTILITY
DATA
INITIALIZE
CIO PRGM
IO NAME DATA
SIMULATED DATA
Maintenance Mode
CIOPRG .LST
IONAME .DAT
PSEUDOIN .DAT
Parameters marked by
can not be selected.
YES NO
Initialize?
To Next Page
Loading...
