YASKAWA motoman NX100 - Page 309

10.2 Addition of Base and Station Axis
10-4
10.2 Addition of Base and Station Axis
For addition of base and station axis, mount all hardware correctly and then execute
maintenance mode.
The additional operation must be done in the management mode.
In operation mode or editing mode, only reference of status setting is possible.
Operation Explanation
1 Turn the power supply ON
again while pressing [MAIN
MENU] simultaneously.
2 Change the "SECURITY
MODE" to the "MANAGE-
MENT MODE."
3 Select {SYSTEM} under the
main menu.
The system window is shown.
4 Select {SETUP}. The SETUP window is shown.
SUPPLE
-MENT
SECURITY
Main Menu ShortCut
SYSTEM
DOUT
MOVE
END
FILE
TOOL
B001
Maintenance Mode
SETTING
VERSION
SECURITY
Main Menu ShortCut
EDIT
DISPLAY
UTILITY
DATA
SETUP
LANGUAGE
CONTROL GROUP
APPLICATION
IO MODULE
OPTION BOARD
Maintenance Mode
CMOS MEMORY
DATE  CLOCK
OPTION FUNCTION
Item marked by
can not be set.