1 Product Handling Precautions
E-27
Play of the Output Shaft for Servomotors with Holding Brakes
The following condition does not indicate a failure in the Servomotor.
There is backlash in the holding brake even when power is not being supplied
to the holding brake. This results in a certain amount of rotational play in the
motor output shaft.
Amount of play: 1.5 max. (initial value)
Braking Noise from Servomotors with Holding Brakes
The following condition does not indicate a failure in the Servomotor.
The brake’s rotating disk will cause some scratching noise during acceleration,
stopping, and low-speed operation.
To Next Page
Loading...
Need help?
General
