E-7
• Do not step on or place a heavy object on the product.
There is a risk of failure, damage, or injury.
• Do not allow any foreign matter to enter the SERVOPACK or Servomotor.
There is a risk of failure or fire.
• Implement safety measures, such as installing a cover so that the rotating part
of the Servomotor cannot be touched accidentally during operation.
• Do not install or store the product in any of the following locations.
• Locations that are subject to direct sunlight
• Locations that are subject to ambient temperatures that exceed product spec-
ifications
• Locations that are subject to relative humidities that exceed product specifi-
cations
• Locations that are subject to condensation as the result of extreme changes
in temperature
• Locations that are subject to corrosive or flammable gases
• Locations that are near flammable materials
• Locations that are subject to dust, salts, or iron powder
• Locations that are subject to water, oil, or chemicals
• Locations that are subject to vibration or shock that exceeds product specifi-
cations
• Locations that are subject to radiation
If you store or install the product in any of the above locations, the product
may fail or be damaged.
• Use the product in an environment that is appropriate for the product specifi-
cations.
If you use the product in an environment that exceeds product specifications,
the product may fail or be damaged.
• A SERVOPACK or Servomotor is a precision device. Do not drop it or subject
it to strong shock.
There is a risk of failure or damage.
Continued on next page.
Continued from previous page.
To Next Page
Loading...
Need help?
General
