This manual describes the specifications for connecting YASNAC J50 Series with
machines, machine interfaces and external equipment.
Necessary connections to be provided by the machine builder differ
depending on the type of the CNC unit supplied by Yaskawa. Make additions or
deletions of connections in accordance with the combination for standard
cabinets and integrated units.
The programmable controller system (hereafter called PC) is installed in
the YASNAC J50 CNC unit. For details of the PC, rafer to instruction Manual for
YASNAC J50 PC System (SIE-C843-I 2.1).
94C84123
YASNAC J50 Operator’s Panel
To Next Page
Loading...
