APPENDIX 4 LIST OF STANDARD lNPUT/OUTPUT SIGNALS
Table 4-1 shows the listof diagnostic numbers
and signal names of standard input/output signals
and monitor signals.
Diagnostic
Number
Display
Notes:
1.
Monitor signals are used to check the inter-
nal condition of the control.
2. The functions of signals #1000 - #1096, #1100
- #1157
MOOO-k1096 I Input signals from machine
Refer to machine tool builder’s manual.
PI lCK1-fH 157 I Output signals to machine
‘*--- -
Output signals to machine interface (PC)
Input signals from machine interface (PC)
D7 D6 D5 D4 D3 D2 D1 DO
00001111
T--
Contact opened
Contact closed
Fig. 4.1 Status Display of Input/Output Signals
A–2!6
To Next Page
Loading...
