Yealink CP920 - Inviting a Transfer Target and a Transferee into a Conference; Inviting an Incoming Call to a Conference; Creating a Hybrid UC Meeting

Yealink CP920 User Guide
26
The active call and the selected hold call are joined into a conference.
Inviting a Transfer Target and a Transferee into a Conference
After consulting with the contact you want to transfer a call to, you can invite the two calls into a conference.
Procedure
1. Select Conference after talking with the contact you want to transfer a call to.
The transferee and the transfer target join the conference.
Inviting an Incoming Call to a Conference
You can create a conference when the phone receives an incoming call during the call(s) or a conference.
Procedure
1. Tap Join when the phone receives a new call.
The conference among the original call(s) and the incoming call is set up. If you are in a conference, the new party
will join the conference.
Creating a Hybrid UC Meeting
You can merge the calls on your phones, the PSTN and the connected mobile phone into a hybrid UC meeting.
There are many ways to create a hybrid UC meeting, the following shows an example.
Procedure
1. Make sure you have connected a mobile phone to your phone.
2. Connect and pair the phone on your mobile phone.
3. Make sure you have an active PSTN account.
4. Do the following to place a mobile call over Bluetooth on the phone.
a) Tap .
b) Tap Switch to choose the Mobile Account.
c) Enter the desired number.
d) Tap or Send.
5. Place a SIP call.
6. Place a PSTN call.
7. Tap Conference.
The hybrid UC meeting is created.
Related Topics
Pairing and Connecting the Bluetooth-enabled Mobile Phone