Yealink CP920 - Deleting a Paging Group; Receiving Multicast Paging; Managing a Paging Call

Yealink CP920 User Guide
34
Check with your system administrator if the Paging List key has set for your phone.
Procedure
1. Tap the Paging List key when the phone is idle.
2. Select the desired paging group.
3. Select Paging to send RTP.
Both your phone and receiver’s phone play a warning tone and the multicast RTP session will be automatically
answered on the receiver’s phone in the speakerphone (hands-free) mode.
Deleting a Paging Group
You can delete any group from the paging group list.
Procedure
1. Tap the Paging List key when the phone is idle.
If the Paging List key is not set, you can also navigate to Menu > Features > Paging List.
2. Select the desired paging group.
3. Select Option > Delete.
The phone prompts you whether to delete the paging group.
4. Select OK.
If you want to delete all paging groups, you can tap Delete All.
Receiving Multicast Paging
Your system administrator has set a listening paging group for you, you can automatically receive a paging call when
the phone is idle.
When there is a voice call or a paging call in progress, the phone handles the new paging call differently according to
the multicast listening settings configured by your system administrator.
Managing a Paging Call
During a paging call, you can manage it manually at any time.
Procedure
l Tap Hold to place the current paging call on hold.
The paging call is placed on hold and the receiver releases the session.
l Tap Resume to resume the held paging call.
The multicast RTP session is re-established.