Yealink MeetingBar A30 - Advanced Camera Features

| Camera Settings | 26
2. Select the desired value from the White Balance Mode field and select OK.
• Auto (default), it calculates the best white balance setting based on lighting conditions in the room.
• Indoor
• Outdoor
• One push (MeetingBar A20)
• ATW (MeetingBar A20), it automatically adjusts the white balance according to the picture taken by
the camera.
• Manual Setting (MeetingBar A20), you can manually adjust the color temperature in the
Temperature field.
• Incandescent (MeetingBar A30)
• Fluorescent (MeetingBar A30)
• Cloudy Daylight (MeetingBar A30)
Adjusting Display Image of the Camera
Procedure
1. Go to More > Settings > Device Settings > Graphics.
2. Select the desired mode from the Display Mode field.
• High Definition
• Standard
• Mild
• Custom, you can adjust the Saturation, Sharpness, Brightness (MeetingBar A20), and Contrast
(MeetingBar A20) respectively, and select the desired mode from the Noise Reduction(2D) field.
Enabling Auto-framing for Camera
Auto-framing is mainly based on face detection, which provides real-time detection and position tracking on
all faces in the conference room. All participants in the output screen are covered and the camera can be
automatically adjusted according to the number of participants and the position changes.
About this task
When the auto-framing feature is enabled, you cannot control the camera position.
Procedure
1. Go to More > Settings > Device Settings > Others.
2. Select Auto Framing in Framing Mode field.
Enabling Speaker-tracking for Camera
Speaker-tracking is based on auto-framing, which can automatically focus on the speaker in the meeting.
Procedure
1. Go to More > Settings > Device Settings > Others.