| Teams Device Settings | 29
Activating or Deactivating the Bluetooth Mode
You need to activate Bluetooth mode to use the Bluetooth feature and you can deactivate the Bluetooth
mode when you no longer use a Bluetooth device.
Procedure
1. Go to More > Settings > Device Settings > Bluetooth.
2. Turn on/off Bluetooth.
Enabling/Disabling Your Device Discovery
You can enable/disable this feature to allow/disallow your device to be discovered by other Bluetooth
devices.
Procedure
1. Go to More > Settings > Device Settings > Bluetooth.
2. Turn on/off Open Discover.
Disconnecting the Bluetooth Device
You can disconnect the Bluetooth device from your device. After the Bluetooth device is disconnected, it
stays in the paired devices list, so that you can easily connect it to your device next time.
Procedure
1. Go to More > Settings > Device Settings > Bluetooth.
2. Select the connected Bluetooth device.
It prompts if you are sure to disconnect.
3. Select OK.
Wireless Network
The Teams device supports the Wi-Fi feature. If there is available Wi-Fi, you can enable the Wi-Fi feature to
connect the device to the wireless network.
• Activating or Deactivating the Wi-Fi Mode
• Connecting to the Wireless Network
• Viewing the Wireless Network Information
• Disconnecting the Wireless Network Connection
Activating or Deactivating the Wi-Fi Mode
You can activate the Wi-Fi mode if you need to connect your device to the wireless work or deactivate the
Wi-Fi mode when you need to connect your device to the wired network.
Procedure
1. Go to More > Settings > Device Settings > Wi-Fi (Admin only, default password: 0000).
2. Turn on/off Wi-Fi.
Connecting to the Wireless Network
There are two ways to connect the device to the wireless network.
To Next Page
Loading...
