| Teams Device Settings | 28
Procedure
1. Go to More > Settings > Device Settings > Display.
2. Select the desired time from the Backlight Time field.
3. Press OK.
Audio Settings
You can connect additional audio devices and choose the way of audio input and output.
Note: It is only applicable to MeetingBar A30.
• Setting Audio Input/Output Device
Setting Audio Input/Output Device
Procedure
Go to More > Settings > Device Settings > Audio Input/Outout Device and choose one of the following:
• Auto
• Built-in Microphone/Speaker
• Line In/Out
Wireless Microphone
You can connect the device with wireless microphones.
• Connecting the Wireless Microphone
Connecting the Wireless Microphone
Before you begin
Make sure the DD10 DECT Dongle is connected to the device.
Procedure
1. Go to More > Settings > Device Settings > Wireless Microphone.
2. Select New Mic-Wireless.
3. Place the MIC on the charger and long press Mute key for 5s into phone registration.
Note: You can connect up to 4 CPW90 (wireless expansion mic). To ensure the stability of the
device, we recommend that you connect 2 CPW90.
Bluetooth
The Teams device supports Bluetooth.
• Activating or Deactivating the Bluetooth Mode
• Enabling/Disabling Your Device Discovery
• Disconnecting the Bluetooth Device
To Next Page
Loading...
