EasyManuals Logo

Yealink SIP-T19P User Manual

Yealink SIP-T19P
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #110 background imageLoading...
Page #110 background image
User Guide for the SIP-T19P IP Phone
100
How to obtain the MAC address of a phone when the phone is not powered on?
Three ways you can obtain the MAC address of a phone:
You can ask your supplier for shipping information sheet which includes MAC
addresses according to the corresponding PO (Purchase Order).
You can find the MAC address in the label of carton box.
You can find the MAC address from the phone’s bar code on the back of the phone.
Why cant I get a dial tone?
Check for any loose connections and that the phone has been installed properly.
For the installation instructions, refer to Phone Installation on page 11.
Switch between the Handset, Headset (if present) and Hands-Free Speakerphone
to check whether the dial tone is present for one of the audio modes.
If the dial tone exists on another audio mode, connect a different handset or
headset to isolate the problem.
Why doesnt the phone ring?
Check that the ringer volume on the phone. To adjust the ringer volume setting, press
the Volume key when the phone is idle. For more information, refer to Volume on page
24.
Why cant I receive calls?
Check that the SIP registration with your system administrator.
Check that DND (Do Not Disturb) feature is disabled on the phone. Refer to Do Not
Disturb (DND) on page 69.
Check that call forward is disabled on the phone. Refer to Call Forward on page
70.
Check whether the caller number is stored in the blacklist. Refer to Blacklist on
page 38.
Why is my handset not working?
Check that the handset cord is fully connected to both the handset jack on the phone
and handset. Refer to Phone Installation on page 11.
Why is my headset not working?
Check that the headset cord is fully connected to the headset jack on the phone.
Refer to Phone Installation on page 11.
Check that the headset mode is activated. Refer to Headset Mode
Activation/Deactivation on page 45.

Other manuals for Yealink SIP-T19P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T19P and is the answer not in the manual?

Yealink SIP-T19P Specifications

General IconGeneral
SpeakerphoneYes
Voice codecsCNG, G.711, G.723, G.726, G.729ab, VAD
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Front cameraNo
Display resolution132 x 64 pixels
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts1
Security algorithms802.1x RADIUS, AES, HTTPS
Networking standardsIEEE 802.1p, IEEE 802.1Q, IEEE 802.1x, IEEE 802.3, IEEE 802.3af, IEEE 802.3u
Supported network protocolsIPv6
Ethernet LAN (RJ-45) ports2
Number of handles included- pc(s)
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth188 mm
Width185 mm
Height143 mm

Related product manuals