User Guide for the SIP-T19P IP Phone
44
5. Press the OK soft key to confirm the deletion or the Cancel soft key to cancel.
You can upload your custom logo which will be shown on the idle screen.
To upload a custom logo via web user interface:
1. Click on Features->General Information.
2. Select Custom Logo from the pull-down list of Use Logo.
3. Click Browse to locate the logo file from your local system.
4. Click Upload to upload the file.
5. Click Confirm to accept the change.
Note
The logo file format must be *.dob, contact your system administrator for more
information.
Logo customization is configurable via web user interface only.
To Next Page
Loading...
