Customizing Your Phone
57
You can enable live dialpad on the SIP-T19P IP phone, which enables the IP phone to
automatically dial out the phone number without pressing the send key. You can also
configure a delay, where the phone will dial out the phone number automatically after
the specified period of time.
To enable live dialpad via web user interface:
1. Click on Settings->Preference.
2. Select Enabled from the pull-down list of Live Dialpad.
3. Enter the desired delay time in the Inter Digit Time (1~14s) field.
The default delay time is 4s.
4. Click Confirm to accept the change.
Note
You can dial a hotline number immediately upon lifting the handset or pressing the
Speakerphone key. You can also configure a delay, where the phone will dial out the
hotline number automatically after the specified period of time.
To configure the hotline number via phone user interface:
1. Press Menu->Features->Hotline.
To Next Page
Loading...
