Yealink SIP-T19P User Manual

User Guide for the SIP-T19P IP Phone
34
2. Select the desired group and then press the Enter soft key.
3. Press or to select the desired contact.
4. Press the Option soft key, and then select Delete from the prompt list.
The LCD screen prompts “Delete selected item?”.
5. Press the OK soft key to confirm the deletion or the Cancel soft key to cancel.
To place a call to a contact from the local directory:
1. Press the Dir soft key.
The IP phone enters the local directory directly as there is only Local Directory in the
directory by default.
If Local Directory is removed from the directory, press Menu->Dir->Local Directory
to enter the local directory.
2. Select the desired group and then press the Enter soft key.
3. Press or to select the desired contact.
4. Do one of the following:
- If only one number of the contact is stored in the local directory, press the Send
soft key to dial out the number.
- If multiple numbers of the contact are stored in the local directory, press the
Send soft key to display a list of numbers.
Press or to select the desired number.
Press the Send soft key to dial out the number.

Yealink SIP-T19P Specifications

General

Speakerphone	Yes
Voice codecs	CNG, G.711, G.723, G.726, G.729ab, VAD
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Front camera	No
Display resolution	132 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	1
Security algorithms	802.1x RADIUS, AES, HTTPS
Networking standards	IEEE 802.1p, IEEE 802.1Q, IEEE 802.1x, IEEE 802.3, IEEE 802.3af, IEEE 802.3u
Supported network protocols	IPv6
Ethernet LAN (RJ-45) ports	2
Number of handles included	- pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	188 mm
Width	185 mm
Height	143 mm