Yealink SIP-T19P User Manual

Basic Call Features
61
To place a call using the headset:
1. With the optional headset connected, press to activate the headset mode.
2. Enter the desired number using the keypad.
3. Press , , or the Send soft key.
Note
To place multiple calls:
You can have more than one call on your SIP-T19P IP phone. To place a new call during
an active call:
1. Press the Hold soft key to place the original call on hold.
2. Press the NewCall soft key.
3. Enter the desired number using the keypad.
4. Press , , or the Send soft key.
You can press or to switch between the calls, and then press the Resume soft
key to retrieve the desired call.
When you are not in another call, you can answer a call in three ways:
 Using the handset
 Using the speakerphone
 Using the headset
Note
Answering When Not in Another Call
Call duration and destination will always appear on the LCD screen for the active call.
To answer a call using the handset:
1. Pick up the handset.
To permanently enable your headset, refer to Headset Prior on page 45.
You can ignore incoming calls by pressing the Reject soft key or the Silence soft key. You
can also activate Do Not Disturb mode to ignore all incoming calls without ring on your
phone. For more information, refer to Do Not Disturb (DND) on page 69.
You can forward incoming calls to someone else by pressing the Fwd soft key. For more
information, refer to Call Forward on page 70.

Yealink SIP-T19P Specifications

General

Speakerphone	Yes
Voice codecs	CNG, G.711, G.723, G.726, G.729ab, VAD
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Front camera	No
Display resolution	132 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	1
Security algorithms	802.1x RADIUS, AES, HTTPS
Networking standards	IEEE 802.1p, IEEE 802.1Q, IEEE 802.1x, IEEE 802.3, IEEE 802.3af, IEEE 802.3u
Supported network protocols	IPv6
Ethernet LAN (RJ-45) ports	2
Number of handles included	- pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	188 mm
Width	185 mm
Height	143 mm