Yealink SIP-T19P User Manual

User Guide for the SIP-T19P IP Phone
86
3. Select Hot Desking from the pull-down list of Type.
5. Click Confirm to accept the change.
Note
To use hot desking:
1. Press the hot desking key when the phone is idle.
The LCD screen prompts “Clear all account config?”.
2. Press the OK soft key, registration configurations (e.g., display name, register name,
user name and password) of the account will be cleared immediately.
The login wizard will be shown as below:
3. Enter the desired values in the User Name and Password fields respectively.
Contact your system administrator for more information.
4. Press the Save soft key to login or Cancel soft key to cancel.
A hot desking key is configurable via web user interface only.

Yealink SIP-T19P Specifications

General

Speakerphone	Yes
Voice codecs	CNG, G.711, G.723, G.726, G.729ab, VAD
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Front camera	No
Display resolution	132 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	1
Security algorithms	802.1x RADIUS, AES, HTTPS
Networking standards	IEEE 802.1p, IEEE 802.1Q, IEEE 802.1x, IEEE 802.3, IEEE 802.3af, IEEE 802.3u
Supported network protocols	IPv6
Ethernet LAN (RJ-45) ports	2
Number of handles included	- pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	188 mm
Width	185 mm
Height	143 mm