EasyManuals Logo
Home>Yealink>IP Phone>SIP-T22P

Yealink SIP-T22P User Manual

Yealink SIP-T22P
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
Enterprise IP Phone Using the Advanced Phone Functions
Using the Advanced Phone Functions
Account Setting
Please refer to the previous part “Configuration and Registration” for the basic Account
setting information. The following table lists the instruction of the field about the
advanced Account Setting.
Field Name Description
UDP Keep-alive
Message
Defines whether to active the phone UDP Keep-alive
mechanism. The default is Enabled.
UDP Keep-alive
Interval
This parameter specifies how often the phone will send a packet
to the SIP server. Default is 30 seconds.
Login Expire This parameter specifies the time frequency that phone
refreshes its registration. The default interval is 3600 seconds.
Local SIP Port Local SIP port. The default value is 5060.
Local RTP Port Defines the local RTP port that the phone will listen and
transmit. The default value is 11780.
RPort The parameter allows you configuring the proxy to send
responses back to a particular address and port. The default is
disabled.
SIP Session Timer This document defines an extension to the Session Initiation
Protocol (SIP). This extension allows for a periodic refresh of
SIP sessions through a re-INVITE or UPDATE request. The
refresh allows both user agents and proxies to determine if the
SIP session is still active.
Subscribe
Period
This parameter could set the period of the subscription. The
default value is 3600.
DTMF Type Select the DTMF type.
You can only configure these settings via Web interface.
1) Choose Account.
2) Select the desired account.
3) Choose Advanced to do the relating settings.
You can consult your system administrator for more information.
- 29 -

Other manuals for Yealink SIP-T22P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T22P and is the answer not in the manual?

Yealink SIP-T22P Specifications

General IconGeneral
DC-in jackYes
Expansion module supportNo
Ethernet LAN (RJ-45) ports2
Volume controlDigital
Keypad number of keys32
Number of handles included1 pc(s)
Power requirements100 - 240 VAC, 5 VDC
Power consumption (typical)2.6 W
Power consumption (PowerSave)1.5 W
Voice codecsG.722, G.723, G.726
Touchscreen-
Display resolution132 x 64 pixels
Lines quantity- lines
Phonebook capacity300 entries
Number of VoIP accounts3
Security algorithmsHTTPS, SRTP
Flash memory8 MB
Internal memory32 MB
Password protection typeUser
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Weight and Dimensions IconWeight and Dimensions
Depth200 mm
Width185 mm
Height90 mm
Weight770 g

Related product manuals