Yealink SIP-T22P User Manual

Troubleshooting
127
take 5 minutes to complete. Please don't power off!”.
4. Click OK to confirm upgrading.
How to reset the phone?
Reset the phone when other troubleshooting suggestions do not correct the problem.
You need to note that all customized settings will be overwritten after resetting. We
recommend asking your system administrator for advice before resetting the phone.
To reset the phone via phone user interface:
1. Press Menu->Settings->Advanced Settings (password: admin).
2. Press or to scroll to Reset to Factory, and then press the Enter soft key.
The LCD screen prompts “Reset to factory settings?”.
3. Press the OK soft key.
The LCD screen prompts “Resetting…Please Waiting!”.
The LCD screen prompts “Initializing Please wait…”.
The phone will be reset to factory sucessfully after startup.
Note
Reset of your phone may take a few minutes. Do not power off until the phone starts up
successfully.

Yealink SIP-T22P Specifications

General

DC-in jack	Yes
Expansion module support	No
Ethernet LAN (RJ-45) ports	2
Volume control	Digital
Keypad number of keys	32
Number of handles included	1 pc(s)
Power requirements	100 - 240 VAC, 5 VDC
Power consumption (typical)	2.6 W
Power consumption (PowerSave)	1.5 W
Voice codecs	G.722, G.723, G.726
Touchscreen	-
Display resolution	132 x 64 pixels
Lines quantity	- lines
Phonebook capacity	300 entries
Number of VoIP accounts	3
Security algorithms	HTTPS, SRTP
Flash memory	8 MB
Internal memory	32 MB
Password protection type	User
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black

Weight and Dimensions

Depth	200 mm
Width	185 mm
Height	90 mm
Weight	770 g