User Guide SIP-T22P IP Phone
84
Dynamic Forwarding
To forward an incoming call to another party:
1. When the phone is ringing, press the Fwd soft key.
2. Enter the number you want to forward the incoming call to.
3. Press , , or the Send soft key.
The incoming call is forwarded. The LCD screen prompts a call forward message.
You can transfer a call to another party in one of the three ways:
Blind Transfer: Transfer a call directly to another party without consulting.
Semi-Attended Transfer: Transfer a call when receiving ringback.
Attended Transfer: Transfer a call with prior consulting.
To perform a blind transfer:
1. Press or the Tran soft key during a call.
2. Enter the number you want to transfer the call to.
3. Press or the Tran soft key to complete the transfer.
Then the call is connected to the number to which you are transferring.
To perform a semi-attended transfer:
1. Press or the Tran soft key during a call.
2. Do one of the following:
- Enter the number you want to transfer the call to.
- Press the Dir soft key, and then select Local Directory. Select the desired group,
and search for the contact (Directory should be configured in advance. Refer to
Directory on page 28 for more information.).
- Press the Dir soft key, and then select History. Select the desired list and use
or to select the entry (Directory should be configured in advance.Refer to
Directory on page 28 for more information.).
- Press the Dir soft key, and then select Remote Phone Book. Select the desired
group and search for the contact (Directory and remote phone book should be
To Next Page
Loading...
