EasyManuals Logo
Home>Yealink>IP Phone>SIP-T22P

Yealink SIP-T22P User Manual

Yealink SIP-T22P
146 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #66 background imageLoading...
Page #66 background image
User Guide SIP-T22P IP Phone
54
Usage:
1. During a call, press the DSS key to activate the group listening mode.
You can then speak and listen through the handset/headset, other persons at your
side can listen through the speaker at the same time.
2. Press the DSS key again to deactivate the group listening mode.
Zero Touch
You can use this key feature to configure auto provision and network parameters quickly.
Dependencies:
Type (Key Event)
Key Type (Zero Touch)
Usage:
1. Press the DSS key to access the zero touch screen.
2. Press the OK soft key in a few seconds.
3. Configure the network parameters in the corresponding fields.
4. Press the Next soft key.
5. Configure the auto provision parameters in the corresponding fields.
6. Press the OK soft key.
The phone will reboot to update configurations.
Keypad Lock
You can use this key feature to immediately lock the keypad of your phone instead of
long pressing . For more information, refer to Keypad Lock on page 22.
Dependencies:
Type (Keypad Lock)
Usage: Press the DSS key to immediately lock the keypad of your phone instead of long
pressing .
Directory
You can use this key feature to easily access frequently used lists. For more information,
refer to Directory on page 28.
Dependencies:
Type (Dir)
Usage: Press the DSS key to immediately access to frequently used lists.
Note
You can customize the soft keys, navigation keys and function keys on the keypad.
To customize the programmable keys via web user interface:
1. Click on DSSKey->Programmable Key.
The DSS key performs the same function as the Dir soft key when the phone is idle.

Table of Contents

Other manuals for Yealink SIP-T22P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T22P and is the answer not in the manual?

Yealink SIP-T22P Specifications

General IconGeneral
DC-in jackYes
Expansion module supportNo
Ethernet LAN (RJ-45) ports2
Volume controlDigital
Keypad number of keys32
Number of handles included1 pc(s)
Power requirements100 - 240 VAC, 5 VDC
Power consumption (typical)2.6 W
Power consumption (PowerSave)1.5 W
Voice codecsG.722, G.723, G.726
Touchscreen-
Display resolution132 x 64 pixels
Lines quantity- lines
Phonebook capacity300 entries
Number of VoIP accounts3
Security algorithmsHTTPS, SRTP
Flash memory8 MB
Internal memory32 MB
Password protection typeUser
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Weight and Dimensions IconWeight and Dimensions
Depth200 mm
Width185 mm
Height90 mm
Weight770 g

Related product manuals