EasyManuals Logo
Home>Yealink>IP Phone>SIP-T22P

Yealink SIP-T22P User Manual

Yealink SIP-T22P
146 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #79 background imageLoading...
Page #79 background image
Basic Call Features
67
To place a call using the headset:
Do one of the following:
- With the optional headset connected, press to activate the headset mode.
Press the line key to obtain a dial tone.
Enter the desired number using the keypad.
Press , , or the Send soft key.
- With the optional headset connected, press to activate the headset mode.
Enter the desired number using the keypad.
Press , , or the Send soft key.
Note
To place multiple calls:
You can have more than one call on your SIP-T22P IP phone. To place a new call during
an active call, do one of the following:
- Press the line key. The active call is placed on hold.
Enter the desired number using the keypad.
Press , , or the Send soft key.
- Press the Hold soft key to place the original call on hold.
Press the NewCall soft key.
Enter the desired number using the keypad.
Press , , or the Send soft key.
You can press or to switch between the calls, and then press the Resume soft
key to retrieve the desired call.
When you are not in another call, you can answer a call in three ways:
Using the handset
Using the speakerphone
Using the headset
Note
To permanently activate the headset mode, refer to Headset Prior on page 46.
You can ignore incoming calls by pressing the Reject soft key or the Silence soft key. You
can also activate Do Not Disturb mode to ignore all incoming calls without ring on your
phone. For more information, refer to Do Not Disturb (DND) on page 75.
You can forward incoming calls to someone else by pressing the Fwd soft key. For more
information, refer to Call Forward on page 78.

Table of Contents

Other manuals for Yealink SIP-T22P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T22P and is the answer not in the manual?

Yealink SIP-T22P Specifications

General IconGeneral
DC-in jackYes
Expansion module supportNo
Ethernet LAN (RJ-45) ports2
Volume controlDigital
Keypad number of keys32
Number of handles included1 pc(s)
Power requirements100 - 240 VAC, 5 VDC
Power consumption (typical)2.6 W
Power consumption (PowerSave)1.5 W
Voice codecsG.722, G.723, G.726
Touchscreen-
Display resolution132 x 64 pixels
Lines quantity- lines
Phonebook capacity300 entries
Number of VoIP accounts3
Security algorithmsHTTPS, SRTP
Flash memory8 MB
Internal memory32 MB
Password protection typeUser
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Weight and Dimensions IconWeight and Dimensions
Depth200 mm
Width185 mm
Height90 mm
Weight770 g

Related product manuals