Yealink SIP-T22P User Manual

Basic Call Features
81
4) (Optional.) Enter the no answer forward on code and off code respectively
in the On Code and Off Code field.
4. Press the Save soft key to accept the change or the Back soft key to cancel.
The icon on the LCD screen indicates call forward is enabled.
To enable call forward in custom mode:
1. Press Menu->Features->Call Forward.
2. Press or to select the desired account, and then press the Enter soft key.
3. Press or to select the desired forwarding type, and then press the Enter
soft key. The options are:
4. Depending on your selection:
a.) If you select Always Forward, you can enable it for a specific account.
1) Press or , or the Switch soft key to select Enable from the Always
field.
2) Enter the destination number you want to forward incoming calls to in the
Forward To field.
3) (Optional.) Enter the always forward on code and off code respectively in
the On Code and Off Code field.
You can also enable always forward for all accounts. After always forward was
enabled for a specific account, do the following:
1) Press or to select the Always field.
2) Press the All Lines soft key.
The LCD screen prompts “Copy to All Lines?”.
3) Press the OK soft key to accept the change or the Cancel soft key to cancel.
b.) If you select Busy Forward, you can enable it for a specific account.
1) Press or , or the Switch soft key to select Enable from the Busy
field.

Yealink SIP-T22P Specifications

General

DC-in jack	Yes
Expansion module support	No
Ethernet LAN (RJ-45) ports	2
Volume control	Digital
Keypad number of keys	32
Number of handles included	1 pc(s)
Power requirements	100 - 240 VAC, 5 VDC
Power consumption (typical)	2.6 W
Power consumption (PowerSave)	1.5 W
Voice codecs	G.722, G.723, G.726
Touchscreen	-
Display resolution	132 x 64 pixels
Lines quantity	- lines
Phonebook capacity	300 entries
Number of VoIP accounts	3
Security algorithms	HTTPS, SRTP
Flash memory	8 MB
Internal memory	32 MB
Password protection type	User
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black

Weight and Dimensions

Depth	200 mm
Width	185 mm
Height	90 mm
Weight	770 g