Yealink SIP-T23G User Manual

Troubleshooting
173
How to upgrade firmware?
To upgrade firmware via web user interface:
1. Click on Settings->Upgrade.
2. Click Browse to locate the required firmware from your local system.
3. Click Upgrade to upgrade the firmware.
The web user interface prompts “Firmware of the SIP Phone will be updated. It will
take 5 minutes to complete. Please don't power off!”.
4. Click OK to confirm upgrading.
How to reset the phone?
Reset the phone to factory configurations after you have tried all troubleshooting
suggestions but do not solve the problem. You need to note that all customized settings
will be overwritten after reset.
To reset the phone via phone user interface:
1. Press Menu->Settings->Advanced Settings (default password: admin) ->Reset to
Factory.
2. Press the Enter soft key.
The LCD screen prompts the following warning:
3. Press the OK soft key.

Yealink SIP-T23G Specifications

General

Backlight	Yes
Voice codecs	G.711a, G.722.2, G.726, G.729ab, iLBC
Volume control	Digital
Handset type	Wired handset
Product type	IP Phone
Product color	Black, Silver
Display resolution	132 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Networking standards	IEEE 802.1p, IEEE 802.1Q, IEEE 802.1x, IEEE 802.3af
Ethernet LAN (RJ-45) ports	2
AC adapter input voltage	100 - 240 V
AC adapter output current	0.6 A
AC adapter output voltage	5 V
Power consumption (typical)	1.56 W
Number of handles included	- pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	188 mm
Width	209 mm
Height	150 mm