EasyManuals Logo

Yealink SIP-T23G User Manual

Yealink SIP-T23G
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #76 background imageLoading...
Page #76 background image
User Guide for the SIP-T23P/G IP Phone
76
3. Select Enabled from the Active Line field.
4. Enter the desired value in Label, Display Name, Register Name, User Name,
Password and SIP Server1/2 field respectively. Contact your system administrator
for more information.
5. If you use the outbound proxy servers, do the following:
1) Press or , or the Switch soft key to select Enabled from the Outbound
Status field.
2) Enter the desired value in the Outbound Proxy1/2 and Proxy Fallback Interval
field respectively. Contact your system administrator for more information.
6. Press the Save soft key to accept the change or the Back soft key to cancel.
You can repeat steps 2 to 6 to register more accounts.
To disable an account via phone user interface:
1. Press Menu->Settings->Advanced Settings (default password: admin)
->Accounts.
2. Select the desired account and then press the Enter soft key.
3. Select Disabled from the Active Line field.
4. Press the Save soft key to accept the change or the Back soft key to cancel.
Account registration is configurable via web user interface at the path
Account->Register.
Note
Default account can be set by pressing or on the idle screen. It has priority
when placing a call. The phones default account cannot be changed after reboot.

Other manuals for Yealink SIP-T23G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T23G and is the answer not in the manual?

Yealink SIP-T23G Specifications

General IconGeneral
BacklightYes
Voice codecsG.711a, G.722.2, G.726, G.729ab, iLBC
Volume controlDigital
Handset typeWired handset
Product typeIP Phone
Product colorBlack, Silver
Display resolution132 x 64 pixels
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts3
Networking standardsIEEE 802.1p, IEEE 802.1Q, IEEE 802.1x, IEEE 802.3af
Ethernet LAN (RJ-45) ports2
AC adapter input voltage100 - 240 V
AC adapter output current0.6 A
AC adapter output voltage5 V
Power consumption (typical)1.56 W
Number of handles included- pc(s)
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth188 mm
Width209 mm
Height150 mm

Related product manuals