Yealink SIP-T4 Series Configuration Guide

BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE 20-BD5476-00
©
2017 BROADSOFT INC. PAGE 55 OF 150
5.2.2.2.1 Create or Modify Device Profile Type
This section identifies the BroadWorks device profile type settings relevant to Device
Management for the Yealink T4x IP Phone.
Browse to System → Resources → Identity/Device Profile Types and perform a search to
find the Yealink device profile type(s) created in section 3.1 BroadWorks Device Profile
Type Configuration or add the device profile type for each model using the settings from
section 3.1 BroadWorks Device Profile Type Configuration if they do not exist.
Configure the device profile type Signaling Address Type, Standard and Advanced options
settings to match the settings in section 3.1 BroadWorks Device Profile Type
Configuration.
Configure the device profile type Device Management options as shown in section 5.2.2.1
Configuration Method 1: Import.
The following subsections identify the required settings specific to Device Management.
5.2.2.2.2 Define Device Profile Type Files
This section describes the BroadWorks Device Management configuration necessary to
identify the configuration files and other files that the Yealink T4x IP Phone downloads.
Configuration templates, firmware, and other files the T4x IP Phone uses must be
uploaded to BroadWorks. Download the Yealink T4x IP Phone CPE kit from BroadSoft
Xchange at xchange.broadsoft.com. Extract the configuration files from the Configuration
Files folder of CPE kit. Obtain the firmware files directly from Yealink.
The following table identifies the Yealink T4x IP Phone configuration files distributed with
the firmware version73 CPE kit.
File Name CPE Kit Template File Name File Type Description
System-
level,
Device-
specific,
Static, Time
Zone Alias
Examples
BWMACADDRESS.cfg %BWMACADDRESS%-
T4x.cfg
Device-
specific
This file contains device-specific
parameters that the phone has to
load.
y0000000000xx.cfg
T40P: xx=54
T40G: xx=76
T41P: xx=36
T42G: xx=29
T46G: xx=28
T48G: xx=35
T41S: xx=68
T42S: xx=67
T46S: xx=66
T48S: xx=65
T49G: xx=51
y0000000000xx.cfg
T40P: xx=54
T40G: xx=76
T41P: xx=36
T42G: xx=29
T46G: xx=28
T48G: xx=35
T41S: xx=68
T42S: xx=67
T46S: xx=66
T48S: xx=65
T49G: xx=51
System-
level
This file contains system level
parameters that the phone has to
load.

Yealink SIP-T4 Series Specifications

General

Brand	Yealink
Model	SIP-T4 Series
Category	Telephone
Language	English