Yealink SIP-T40G

BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE 20-BD5476-00
©
2017 BROADSOFT INC. PAGE 142 OF 150
## Features Pickup(Except T20P model)
##
##########################################################################
#############
##It enables or disables the phone to display the GPickup soft key when
the phone is in the pre-dialing screen.
##0-Disabled,1-Enabled.
##The default value is 0.
features.pickup.group_pickup_enable =
##It configures the group call pickup code.
##The default value is blank.
features.pickup.group_pickup_code = %BWFAC-CALL-PICKUP-1%
##It enables or disables the phone to display the DPickup soft key when
the phone is in the pre-dialing screen.
##0-Disabled,1-Enabled.
##The default value is 0.
features.pickup.direct_pickup_enable =
##It configures the directed call pickup code.
##The default value is blank.
features.pickup.direct_pickup_code = %BWFAC-DIRECTED-CALL-PICKUP-1%
##It enables or disables the phone to display a visual alert when the
monitored user receives an incoming call.
##0-Disabled,1-Enabled.
##The default value is 0.
features.pickup.blf_visual_enable =
##It enables or disables the phone to play an audio alert when the
monitored user receives an incoming call.
##0-Disabled,1-Enabled.
##The default value is 0.
features.pickup.blf_audio_enable =
##########################################################################
#############
## Call Park(Except T20P model)
##
##########################################################################
#############
###You can choose which park type to use
###0-XSI call park,1-FAC call park default value is 0.
features.call_park.park_mode=
###when you select FAC park, you shold input the park FAC code
###default value is blank.
features.call_park.park_code=
###when you select FAC park, you shold input the group park FAC code
###default value is blank.
features.call_park.group_park_code=
###when you select FAC park, you shold input the retrieve park FAC code
###default value is blank.
features.call_park.park_retrieve_code=
###It enables or disables the phone to display the Park soft key during a
call.
###0-Disabled,1-Enabled.
###The default value is 0.
call_park.enable = %FEATURE_BW_CALL_PARK%
###It enables or disables the phone to display the GPark soft key during a
call.
###0-Disabled,1-Enabled.
###The default value is 0.