Yealink SIP-T40G

BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE 20-BD5476-00
©
2017 BROADSOFT INC. PAGE 145 OF 150
#gui_lang.url =
http://%BWDEVICEACCESSFQDN%:%BWDEVICEACCESSPORT%/%BWDMSCONTEXT%/%BWDEVICEA
CCESSURI%%BWLANGUAGE-1%
gui_lang.delete =
##Except T19P/T21P Models
wui_lang.url =
wui_lang_note.url =
wui_lang.delete =
##########################################################################
#############
## Autop
##
##########################################################################
#############
auto_provision.server.username = %BWDEVICEUSERNAME%
auto_provision.server.password = %DEVICE_ACCESS_PWD%
##########################################################################
#############
## NETWORK
##
##########################################################################
#############
##It configures the IP address mode.0-IPv4,1-IPv6,2-IPv4&IPv6
##The default value is 0.It takes effect after a reboot.
network.ip_address_mode =
network.ipv6_prefix =
network.ipv6_internet_port.type =
network.ipv6_internet_port.ip =
network.ipv6_internet_port.gateway =
network.ipv6_primary_dns =
network.ipv6_secondary_dns =
####Only T46G Model supports this parameter
network.ipv6_icmp_v6.enable =
network.internet_port.type =
network.internet_port.ip =
network.internet_port.mask =
network.internet_port.gateway =
network.primary_dns= %DNS_SERVER_1%
network.secondary_dns = %DNS_SERVER_2%
Default-System File: y000000000054.cfg.def file
NOTE: This is an example file and it should be used for reference only.
#!version:1.0.0.1
auto_provision.server.url =
http://xsp1.iop1.broadworks.net:80/dms/Yealink-T40P/
auto_provision.dhcp_option.enable = 0