Yealink SIP-T40G Configuration Guide

BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE 20-BD5476-00
©
2017 BROADSOFT INC. PAGE 56 OF 150
File Name CPE Kit Template File Name File Type Description
contact.xml contact.xml Static This file contains the contact
information in XML format.
blacklist.xml blacklist.xml Static This file contains the blacklist
contact information in XML format.
DialPlan.xml DialPlan.xml Static Specifies the dialing rules.
AutoDST.xml AutoDST.xml Static Rules set of the beginning and
end of daylight savings time.
TimeZoneAliasLabels_Y
ealink+<model>.properti
es
TimeZoneAliasLabels_Yealink-
<model>.properties
Time Zone
Alias
The Time Zone Alias file is a
BroadWorks Device Management
file used to map time zone
identifiers between BroadWorks
and Yealink phones. A Time Zone
Alias file is required for each
model.
WebItemsLevel.cfg WebItemsLevel.cfg Static This file defines the access level
of configuration items in cfg
format.
CallFailed.xml Call Failed.xml Static This file defines the soft key of the
call failed state.
CallIn.xml CallIn.xml Static This file defines the incoming call
state.
Connecting.xml Connecting.xml Static This file defines the soft key of
connecting state.
Dialing.xml Dialing.xml Static This file defines the soft key of
dialing state.
favorite_setting.xml favorite_setting.xml static This file configures desired lists of
the Directory soft key.
Language files:
000.GUI.English.lang
000.GUI.English.lang(Phone
Model)
Static This is the customized languages
file for English.
Ring.wav Ring.wav Static This is the ring tone in WAV
format.
RingBack.xml RingBack(<Phone Model>).xml Static This file defines the soft key of ring
back state.
super_search.xml super_search.xml Static This file configures the search
source list in dialing.
Talking.xml Talking(<Phone Model>).xml Static This file defines the soft key of
talking state.
The following table identifies other files that the Yealink T4xG IP Phone downloads from
the server or uploads to the server. These files are not provided in the CPE kit and must
be obtained from Yealink.
File Name File Type Description
x.x.x.x.rom Static Device firmware file.
xxx.GUI.<language>.lang Static Customized language files.
Browse to System → Resources → Identity/Device Profile Types → Files and
Authentication to add the files as described in the following subsections.

Yealink SIP-T40G Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Wall mountable	Yes
Wi-Fi	No
Security algorithms	AES, HTTPS, SSL/TLS
Networking standards	IEEE 802.3af
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	FTP, TFTP, HTTP, HTTPS
Voice codecs	G.711, G.711a, G.711u, G.722, G.726, G.729ab
RJ-11 ports quantity	1
Ethernet LAN (RJ-45) ports	2
AC adapter input voltage	100 - 240 V
AC adapter output current	0.6 A
AC adapter output voltage	5 V
Power consumption (typical)	1.6 W
Certification	CE, FCC, ISO 9001
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 90 %
Volume control	Digital
Display diagonal	2.3 \
Display resolution	132 x 64 pixels
Lines quantity	3 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	175 mm
Width	212 mm
Height	54 mm