Yealink SIP-T41P Configuration Guide

Yealink IP Phones Configuring Guide
20
The default value is Disabled.
8. Click Save changes to accept the change.
9. Perform auto provisioning on the phone to download above configurations. For
more information on how to perform auto provisioning, refer to Downloading
Configuration Files on page 7.
To view the directory via phone user interface:
1. Press the Dir soft key when the phone is idle.
The enabled list(s) will be ordered from highest priority to lowest.
Note
You can add new contacts to the local directory, search for a contact, or simply dial a
contact number from the remote phone book.
You can configure your new phone to access up to 5 remote phone books. For the
access URL of the remote phone book, contact your system administrator.
To configure an access URL for a remote phone book the CommPortal phone
configurator:
1. Click on Features->Remote Phone Book.
If Remote Phone Book, LDAP, Network Contacts and Network Call List are not configured
in advance, you cannot see them on the phone user interface.
For more information on Remote Phone Book, refer to Remote Phone Book on page 20.
For more information on the LDAP, refer to Yealink SIP-T2 Series T4 Series IP Phones
Administrator Guide . For more information on the Network Contacts and Network Call
List, refer to Yealink SIP Phones Integrated with Metaswitch CommPortal Phone
Applications User Guide.

Yealink SIP-T41P Specifications

General

Power requirements	AC 100-240V, DC 5V
Power over Ethernet (PoE)	Yes
Touchscreen	-
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Voice codecs	G.711, G.723, G.726, G.729A, G.729B
Bluetooth	No
Ethernet LAN (RJ-45) ports	2
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	189 mm
Width	212 mm
Height	175 mm