Yealink IP Phones Configuring Guide
22
4. Enter a few continuous characters of the contact name or continuous numbers of the
contact number using the keypad.
The contacts whose name or phone number matches the characters entered will
appear on the LCD screen. You can place a call from the result list.
To place a call from the remote phone book:
1. Press Menu->Directory->Remote Phone Book.
If Remote Phone Book is added to the directory, press Dir->Remote Phone Book to
enter the remote phone book.
2. Select the desired remote group, and then press the Enter soft key to load the
remote phone book.
3. Select the desired contact in the remote phone book.
4. Press the Send soft key.
In addition, you can enable the phone to present the caller identity stored in the remote
phone book when receiving a call.
To enable the presentation of a caller identity stored in remote phone book via web user
interface:
1. Click on Features->Remote Phone Book.
2. Mark the Enabled radio box of the Search Remote Phonebook Name field.
3. Enter the desired refresh period in the Search Flash Time (Seconds) field.
The default value is 21600 seconds.
4. Click Confirm to accept the change.
5. Click Save changes to accept the change.
6. Perform auto provisioning on the phone to download above configurations. For
more information on how to perform auto provisioning, refer to Downloading
Configuration Files on page 7.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
