Yealink SIP-T41P Configuration Guide

Customizing Your Phone
27
 Last Caller ID Erasure
 LDAP
 Line Identity
 Multicast Paging
 Paging List
 Park Call
 Prefix
 Private Call Hold
 Retrieved Parked Call
 Speed Dial
 Trace Call
 Transfer
 VoiceMail
 XML Group
 Zero Touch
 ACD
 Log Out
 Network Contacts
 History
 Messages List
Line
You can use this key feature to accept incoming calls, place active calls on hold or
resume a held call. It performs in the same way as a hard line key.
Dependencies: Soft key action (Line)
Line (the account this feature will be applied to)
Mode (Default/Lock)
Label (key label displayed on the LCD screen)
Usage: When receiving an incoming call, the Line key LED flashes green:
1. Press the DSS key to accept the incoming call.
2. Press the DSS key to place a new call and the active call is placed on hold.
3. Press the DSS key again to resume the held call.
If you select Lock from the Mode field, the line keys located in the same position of the
other page will be automatically assigned the Line feature. Then you can use this key on
every page.
If you select Default from the Mode field, you can only use this key on the current page.

Yealink SIP-T41P Specifications

General

Power requirements	AC 100-240V, DC 5V
Power over Ethernet (PoE)	Yes
Touchscreen	-
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Voice codecs	G.711, G.723, G.726, G.729A, G.729B
Bluetooth	No
Ethernet LAN (RJ-45) ports	2
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	189 mm
Width	212 mm
Height	175 mm