Yealink SIP-T41P Configuration Guide

Yealink IP Phones Configuring Guide
30
Park Call
You can use this key feature to park an active call to an available orbit by pressing the
park call key on the phone. For more information, refer to Park Call on page 50.
Dependencies: Soft key action (Park Call)
Access Code (the park call access code)
Label (key label displayed on the LCD screen)
Usage: Press the DSS key during an active call to park an active call to an available
orbit.
Enhanced Call Park
You can use this key feature to park an active call to a designated orbit by pressing the
enhanced call park key on the phone. For more information, refer to Enhanced Call Park
on page 50.
Dependencies: Soft key action (Enhanced Call Park)
Line (the account this feature will be applied to)
Park Orbit (the orbit where your call will be parked)
Label (key label displayed on the LCD screen)
Usage:
Press the DSS key to park an active call the orbit specified in the Park Orbit field.
Retrieved Parked Call
You can use this key feature to retrieve a parked call by pressing the retrieved parked
call key on the phone. For more information, refer to Retrieve Parked Call on page 51.
Dependencies: Soft key action (Retrieved Parked Call)
Line (the account this feature will be applied to)
Park Orbit (the orbit where your retrieve the parked call)
Label (key label displayed on the LCD screen)
Usage:
Press the DSS key to retrieve the parked call specified in the Park Orbit field.
Enhanced Monitor Extension
You can use this key feature to monitor a specific line for status changes on the phone.
You can press an enhanced monitor extension key to dial out the monitored phone
number when the monitored line is idle. You can receive a visual or/and an audio alert
(if enabled), and also pick up calls that are received on the monitored line. For more
information, refer to Enhanced Monitor Extension on page 54.
Dependencies: Soft key action (Enhanced Monitor Extension)
Line (the account this feature will be applied to)
Extension (the extension you want to monitor)

Yealink SIP-T41P Specifications

General

Power requirements	AC 100-240V, DC 5V
Power over Ethernet (PoE)	Yes
Touchscreen	-
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Voice codecs	G.711, G.723, G.726, G.729A, G.729B
Bluetooth	No
Ethernet LAN (RJ-45) ports	2
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	189 mm
Width	212 mm
Height	175 mm