Yealink SIP-T41P Configuration Guide

Yealink IP Phones Configuring Guide
44
 Phone: DND is effective for the phone system.
 Custom: DND can be configured for each or all accounts
To configure the DND mode via web user interface:
1. Click on Features->Forward & DND.
2. Select the desired DND mode from the DND Mode field.
3. Click Confirm to accept the change.
To activate DND in phone mode:
1. Press the DND soft key when the phone is idle.
The icon on the status bar indicates that DND is enabled.
Incoming calls will be rejected automatically and "n New Missed Call(s)" ("n"
indicates the number of missed calls) will prompt on the LCD screen.
To activate DND in custom mode for a specific account:
1. Press the DND soft key when the phone is idle.
The LCD screen displays a list of accounts registered on the phone.
2. Press or to select the desired account and then press the Enter soft key.
3. Press or , or the Switch soft key to select Enabled from the DND Enable
field.
4. Press the Save soft key to accept the change.

Yealink SIP-T41P Specifications

General

Power requirements	AC 100-240V, DC 5V
Power over Ethernet (PoE)	Yes
Touchscreen	-
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Voice codecs	G.711, G.723, G.726, G.729A, G.729B
Bluetooth	No
Ethernet LAN (RJ-45) ports	2
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	189 mm
Width	212 mm
Height	175 mm