EasyManuals Logo

Yealink SIP-T41P Configuration Guide

Yealink SIP-T41P
91 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
Using Your Phone
49
Transfer On Conference Hang up
Transfer On Conference Hang up feature enables the IP phone to transfer the local
conference call to the other two parties after the conference initiator drops the
conference call.
To configure the transfer on conference hang up feature via the CommPortal phone
configurator:
1. Click on Features->Transfer.
2. Mark the desired radio box in the Transfer on Conference Hang up field.
- If you select Enabled, the other two parties remain connected when the
conference initiator drops the conference call.
- If you select Disabled, the conference ends.
3. Click Save changes to accept the change.
4. Perform auto provisioning on the phone to download above configurations. For
more information on how to perform auto provisioning, refer to Downloading
Configuration Files on page 7.
You can use call park feature to park a call, and then retrieve the parked call from
another phone (for example, a phone in another office or conference room).
IP phone supports park call and enhanced park call. For park call feature, the server will
automatically hunt for the first available orbit in the call park orbits and parks the call
there. The call park orbits should be predefined, contact your system administrator for
more information. For enhanced park call feature, you have to specify a target orbit
where you want to park the call to.
You can park an active call by pressing the park call key or the enhanced call park key
(if configured) on the phone. If the call is parked successfully, you will hear a voice
prompt confirming that the call was parked.
You can retrieve the parked call by pressing a retrieve parked call key (if configured) or
dialing the retrieve access code followed by the orbit number (e.g., *302100).

Other manuals for Yealink SIP-T41P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T41P and is the answer not in the manual?

Yealink SIP-T41P Specifications

General IconGeneral
Power requirementsAC 100-240V, DC 5V
Power over Ethernet (PoE)Yes
Touchscreen-
Display diagonal2.7 \
Display resolution192 x 64 pixels
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts3
Voice codecsG.711, G.723, G.726, G.729A, G.729B
BluetoothNo
Ethernet LAN (RJ-45) ports2
Storage temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width212 mm
Height175 mm

Related product manuals