Yealink IP Phones Configuring Guide
52
The system establishes call between phone C and B.
Note
You can use call pickup to answer someone else’s incoming call on your phone. The
phone supports directed call pickup and group call pickup. Directed pickup is used for
picking up a call that is ringing at a target phone number. Group pickup is used for
picking up a call that is ringing at any phone number in a certain group. The pickup
group should be predefined, contact your system administrator for more information.
To use call pickup, you need to configure the directed pickup or group pickup key first.
Note
To configure a directed pickup key via the CommPortal phone configurator:
1. Click on Programmable Keys - Line Key->Key X.
2. Select Directed Pickup from the Soft key action field.
3. Enter the directed pickup code in the Access Code field.
4. Enter the target phone number in the Extension field.
5. Enter the string that will appear on the LCD screen in the Label field.
6. Click Save changes to accept the change.
7. Perform auto provisioning on the phone to download above configurations. For
more information on how to perform auto provisioning, refer to Downloading
Configuration Files on page 7.
If the parked call is not retrieved within a period of time assigned by the system, the
phone performing call park will receive a call back.
If there are many incoming calls at the same time, pressing the group pickup key on the
phone will pick up the call that rings first.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
