Yealink SIP-T41P Configuration Guide

Using Your Phone
67
To transfer active call to an alternate extension:
If C needs to consult A and B frequently, A can dial *95 to jump the call to B during a call
with C, then C can continue consulting B. Before B answers the call, A and C will stay
connected.
Scenarios B:
The system administrator has configured a wireless number that phone A may want to
transfer calls to in CommPortal.
To transfer active call to an alternate wireless device:
If A and C have chatted on a phone for a long time, but A needs to leave home. In this
case, A can dial *96 to quickly jump the current call to a wireless number without
interrupting the conversation. Before A uses the mobile phone to answer the call, the
call will stay connected.
Scenarios C:
To avoid hotkey conflict issues when listening to voice mails:
User A dials the voice mail access code to listen to voice mails. To avoid the call jump
hotkeys to conflict with voice mailbox hotkeys, User A can dial *90 to disable the call
jump feature temporarily when listening to voice mails. After A hangs up the call, the
call jump hotkeys will work again.
Note
The destination you want to jump your call to must be predefined in CommPortal. For
more information, contact your administrator.

Yealink SIP-T41P Specifications

General

Power requirements	AC 100-240V, DC 5V
Power over Ethernet (PoE)	Yes
Touchscreen	-
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Voice codecs	G.711, G.723, G.726, G.729A, G.729B
Bluetooth	No
Ethernet LAN (RJ-45) ports	2
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	189 mm
Width	212 mm
Height	175 mm