Yealink SIP-T41P Configuration Guide

Yealink IP Phones Configuring Guide
76
Environmental Requirements

Place the device at a well-ventilated place. Do not expose the device under
direct sunlight.

Keep the device dry and free of dust.

Place the device on a stable and level platform.

Please do not place heavy objects on the device in case of damageand
deformation caused by the heavy load.

Keep at least 10 cm between the device and the closest object for heat
dissipation.

Do not place the device on or near any inflammable or fire-vulnerable object,
such as rubber-made materials.

Keep the device away from any heat source or bare fire, such as a candle or
an electric heater.

Keep the device away from any household appliance with a strong
magnetic field or electromagnetic field, such as a microwave oven or a
refrigerator.
Operating Requirements

Do not let a child operate the device without guidance.

Do not let a child play with the device or any accessory in case of accidental
swallowing.

Please only use the accessories provided or authorized by the manufacturer.

The power supply of the device must meet the requirements of the input
voltage of the device. Please use the provided surge protection power
socket only.

Before plugging or unplugging any cable, make sure that your hands are
completely dry.

Do not spill liquid of any kind on the product or use the equipment near
water, for example, near a bathtub, washbowl, kitchen sink, wet basement
or near a swimming pool.

Do not tread on, pull, or over-bend any cable in case of malfunction of the
device.

During a thunderstorm, stop using the device and disconnect it from the
power supply. Unplug the power plug and the Asymmetric Digital Subscriber
Line (ADSL) twisted pair (the radio frequency cable) to avoid lightning strike.

If the device is left unused for a rather long time, disconnect it from the
power supply and unplug the power plug.

When there is smoke emitted from the device, or some abnormal noise or
smell, disconnect the device from the power supply, and unplug the power
plug immediately. Contact the specified maintenance center for repair.

Do not insert any object into equipment slots that is not part of the product or
auxiliary product.

Before connecting a cable, connect the grounding cable of the device first.
Do not disconnect the grounding cable until you have disconnected all other
cables.

Yealink SIP-T41P Specifications

General

Power requirements	AC 100-240V, DC 5V
Power over Ethernet (PoE)	Yes
Touchscreen	-
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Voice codecs	G.711, G.723, G.726, G.729A, G.729B
Bluetooth	No
Ethernet LAN (RJ-45) ports	2
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	189 mm
Width	212 mm
Height	175 mm