Yealink SIP-T41S - Page 128

BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE 20-BD5476-00
©
2017 BROADSOFT INC. PAGE 128 OF 150
account.2.call_center.disp_code_enable =
account.2.call_center.trace_enable =
account.2.call_center.emergency_enable =
account.2.call_center.queue_status_enable =
account.2.call_center.queue_status_light_enable =
##########################################################################
#############
## Broadsoft XSI ##
##########################################################################
#############
##It configures the user name for XSI authentication for account
X.Example:account.2.xsi.user = 3502@as.iop1.broadworks.net.
##The default value is blank.
account.2.xsi.user = %BWLOGIN-ID-2%
##It configures the password for XSI authentication for account
X.Example:account.2.xsi.password = 123456.
##The default value is blank.
account.2.xsi.password = %XSIPASSWORD-2%
##It configures the access URL of the Xtended Services Platform server for
account X.Example:account.2.xsi.host = xsp1.iop1.broadworks.net.
##The default value is blank.
account.2.xsi.host = %XSP_ADDRESS%
##It configures the server type of the Xtended Services Platform server
for account X.Example:account.2.xsi.server_type = http.
##The default value is http.
account.2.xsi.server_type =
##It configures the server port of the Xtended Services Platform server
for account X.Example:account.2.xsi.port = 80.
##The default value is 80.Integer from 1 to 65535
account.2.xsi.port =
##########################################################################
#############
## V80 Add
##
##########################################################################
#############
## Add Time 2015.6.26
account.2.callerid_in_support_header.enable =
account.2.acd.auto_login_enable =
account.2.outbound_proxy_fallback_interval =
account.2.transfer_refer_to_contact_header.enable =
account.2.sub_fail_retry_interval =
account.2.update_ack_while_dialing =
account.2.end_call_when_transferred.enable =
account.2.nat.stun_refresh_timer =
account.2.contact_take_line_param.enable =
##########################################################################
#############
## V80-SP2 Add
##
##########################################################################
#############
account.2.acd.call_information =