EasyManua.ls Logo

Yealink SIP-T41S - Automatic Call Answering

Yealink SIP-T41S
150 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BROADSOFT PARTNER CONFIGURATION GUIDE YEALINK T4X IP PHONE 20-BD5476-00
©
2017 BROADSOFT INC. PAGE 130 OF 150
##########################################################################
#############
## Account3 Basic Settings
##
##########################################################################
#############
account.3.enable = %BWLINE-BINARY-3%
account.3.label = %BWEXTENSION-3%
account.3.display_name = %BWCLID-3%
account.3.auth_name = %BWAUTHUSER-3%
account.3.user_name = %BWLINEPORT-3%
account.3.password = %BWAUTHPASSWORD-3%
account.3.outbound_proxy_enable = %USE_SBC_BOOLEAN%
account.3.outbound_proxy.1.address = %SBC_ADDRESS%
account.3.outbound_proxy.1.port = %SBC_PORT%
account.3.dial_tone =
account.3.outbound_proxy.2.address =
account.3.outbound_proxy.2.port =
##It configures the transport type for account 1. 0-UDP,1-TCP,2-TLS,3-DNS-
NAPTR
##The default value is 0.
account.3.sip_server.1.transport_type = %TRANSPORT%
account.3.sip_server.2.transport_type = %TRANSPORT%
##########################################################################
#############
## Failback
##
##########################################################################
#############
account.3.naptr_build =
account.3.fallback.redundancy_type =
account.3.fallback.timeout =
account.3.sip_server.1.address = %BWHOST-3%
account.3.sip_server.1.port = 5060
account.3.sip_server.1.expires = 3600
account.3.sip_server.1.retry_counts =
account.3.sip_server.1.failback_mode =
account.3.sip_server.1.failback_timeout =
account.3.sip_server.1.register_on_enable =
account.3.sip_server.2.address =
account.3.sip_server.2.port =
account.3.sip_server.2.expires =
account.3.sip_server.2.retry_counts =
account.3.sip_server.2.failback_mode =
account.3.sip_server.2.failback_timeout =
account.3.sip_server.2.register_on_enable =
account.3.dns_cache_type =
account.3.static_cache_pri = %STATIC-CACHE-PRI%
account.3.register_expires_overlap =
account.3.subscribe_expires_overlap =
##########################################################################
#############
## Register Advanced
##

Table of Contents

Other manuals for Yealink SIP-T41S

Related product manuals