Yealink SIP-T41S Configuration Guide

BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE 20-BD5476-00
©
2017 BROADSOFT INC. PAGE 142 OF 150
## Features Pickup(Except T20P model)
##
##########################################################################
#############
##It enables or disables the phone to display the GPickup soft key when
the phone is in the pre-dialing screen.
##0-Disabled,1-Enabled.
##The default value is 0.
features.pickup.group_pickup_enable =
##It configures the group call pickup code.
##The default value is blank.
features.pickup.group_pickup_code = %BWFAC-CALL-PICKUP-1%
##It enables or disables the phone to display the DPickup soft key when
the phone is in the pre-dialing screen.
##0-Disabled,1-Enabled.
##The default value is 0.
features.pickup.direct_pickup_enable =
##It configures the directed call pickup code.
##The default value is blank.
features.pickup.direct_pickup_code = %BWFAC-DIRECTED-CALL-PICKUP-1%
##It enables or disables the phone to display a visual alert when the
monitored user receives an incoming call.
##0-Disabled,1-Enabled.
##The default value is 0.
features.pickup.blf_visual_enable =
##It enables or disables the phone to play an audio alert when the
monitored user receives an incoming call.
##0-Disabled,1-Enabled.
##The default value is 0.
features.pickup.blf_audio_enable =
##########################################################################
#############
## Call Park(Except T20P model)
##
##########################################################################
#############
###You can choose which park type to use
###0-XSI call park,1-FAC call park default value is 0.
features.call_park.park_mode=
###when you select FAC park, you shold input the park FAC code
###default value is blank.
features.call_park.park_code=
###when you select FAC park, you shold input the group park FAC code
###default value is blank.
features.call_park.group_park_code=
###when you select FAC park, you shold input the retrieve park FAC code
###default value is blank.
features.call_park.park_retrieve_code=
###It enables or disables the phone to display the Park soft key during a
call.
###0-Disabled,1-Enabled.
###The default value is 0.
call_park.enable = %FEATURE_BW_CALL_PARK%
###It enables or disables the phone to display the GPark soft key during a
call.
###0-Disabled,1-Enabled.
###The default value is 0.

Yealink SIP-T41S Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Keypad illumination	Yes
Wi-Fi	No
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Supported network protocols	SIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Volume control	Digital
Number of programmable keys	6
Lines quantity	6 lines
Phonebook capacity	1000 entries
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Voice codecs	CNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
Certification	CE
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	189 mm
Width	212 mm
Height	175 mm
Package depth	223 mm
Package width	246 mm
Package height	120 mm