BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE 20-BD5476-00
©
2017 BROADSOFT INC. PAGE 82 OF 150
## Autop Code
##
##########################################################################
#############
##It configures the name of the code for triggering auto provisioning.
##The default value is blank.It takes effect after a reboot.
static.autoprovision.1.name =
##It configures the code for triggering auto provisioning.
##Valid characters are digits, # and *.Example:static.autoprovision.1.code
= *99The default value is blank.
##It takes effect after a reboot.
static.autoprovision.1.code =
##It configures the access URL of auto provisioning server.The default
value is blank.
##It takes effect after a reboot.
static.autoprovision.1.url =
##It configures the user name for authentication during auto provisioning.
##The default value is blank.It takes effect after a reboot.
static.autoprovision.1.user =
##It configures the password for authentication during auto provisioning.
##The default value is blank.It takes effect after a reboot.
static.autoprovision.1.password =
##It configures the AES key for decrypting the Common CFG file.
##The default value is blank.It takes effect after a reboot.
static.autoprovision.1.com_aes =
##It configures the AES key for decrypting the MAC-Oriented CFG file.
##The default value is blank.It takes effect after a reboot.
static.autoprovision.1.mac_aes =
##########################################################################
#############
## Watch Dog
##
##########################################################################
#############
static.watch_dog.enable =
##########################################################################
#############
## SIP Advanced
##
##########################################################################
#############
sip.use_23_as_pound =
sip.rfc2543_hold =
sip.use_out_bound_in_dialog =
sip.reg_surge_prevention =
sip.send_response_by_request =
sip.notify_reboot_enable = 1
sip.disp_incall_to_info =
sip.limit_server_name =
sip.limit_server_reason =
sip.listen_port =5060
sip.tls_listen_port =
sip.trust_ctrl =
sip.nat_stun.enable =
sip.nat_stun.server =
To Next Page
Loading...
