Yealink SIP-T41S - Local Directory Management

BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE 20-BD5476-00
©
2017 BROADSOFT INC. PAGE 84 OF 150
##########################################################################
#############
## Tones
##
##########################################################################
#############
### Only T28P/T26P/T22P/T20P Models and V80 support the three parameters
voice.handfree_send =
voice.handset_send =
voice.headset_send =
##########################################################################
#############
## Transfer
##
##########################################################################
#############
##It enables or disables the transferee party¡¯s phone to prompt a missed
call on the LCD screen before displaying
##the caller ID when performing a semi-attended transfer.0-Enabled,1-
Disabled
##The default value is 1.
transfer.semi_attend_tran_enable =
##It enables or disables the phone to complete the blind transfer through
on-hook.0-Disabled,1-Enabled .
##The default value is 1.
transfer.blind_tran_on_hook_enable =
##It enables or disables the phone to transfer call to the two parties
after a local conference call hangs up.
##0-Disabled,1-Enabled.
##The default value is 0.
transfer.tran_others_after_conf_enable =
##It enables or disables the phone to complete the attended transfer
through on-hook.
##0-Disabled,1-Enabled.
##The default value is 1.
transfer.on_hook_trans_enable =
##It configures the DSS key behavior during an active call when user
presses the DSS
##key and the DSS key is configured as a speed dial, transfer or BLF/BLF
list key.
##0-New Call,1-Attended Transfer,2-Blind Transfer.
##The default value is 2.
transfer.dsskey_deal_type =
###Except T20P/T41P/T42G/T46G Models
##It enables or disables the phone to enter Transfer to menu during
multiple calls when pressing the transfer soft key or TRAN key.
##0-Disabled,1-Enabled.
##The default value is 1.
transfer.multi_call_trans_enable =
##########################################################################
#############
## Auto Redial
##