Yealink SIP-T46S Configuration Guide

BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE 20-BD5476-00
©
2017 BROADSOFT INC. PAGE 142 OF 150
## Features Pickup(Except T20P model)
##
##########################################################################
#############
##It enables or disables the phone to display the GPickup soft key when
the phone is in the pre-dialing screen.
##0-Disabled,1-Enabled.
##The default value is 0.
features.pickup.group_pickup_enable =
##It configures the group call pickup code.
##The default value is blank.
features.pickup.group_pickup_code = %BWFAC-CALL-PICKUP-1%
##It enables or disables the phone to display the DPickup soft key when
the phone is in the pre-dialing screen.
##0-Disabled,1-Enabled.
##The default value is 0.
features.pickup.direct_pickup_enable =
##It configures the directed call pickup code.
##The default value is blank.
features.pickup.direct_pickup_code = %BWFAC-DIRECTED-CALL-PICKUP-1%
##It enables or disables the phone to display a visual alert when the
monitored user receives an incoming call.
##0-Disabled,1-Enabled.
##The default value is 0.
features.pickup.blf_visual_enable =
##It enables or disables the phone to play an audio alert when the
monitored user receives an incoming call.
##0-Disabled,1-Enabled.
##The default value is 0.
features.pickup.blf_audio_enable =
##########################################################################
#############
## Call Park(Except T20P model)
##
##########################################################################
#############
###You can choose which park type to use
###0-XSI call park,1-FAC call park default value is 0.
features.call_park.park_mode=
###when you select FAC park, you shold input the park FAC code
###default value is blank.
features.call_park.park_code=
###when you select FAC park, you shold input the group park FAC code
###default value is blank.
features.call_park.group_park_code=
###when you select FAC park, you shold input the retrieve park FAC code
###default value is blank.
features.call_park.park_retrieve_code=
###It enables or disables the phone to display the Park soft key during a
call.
###0-Disabled,1-Enabled.
###The default value is 0.
call_park.enable = %FEATURE_BW_CALL_PARK%
###It enables or disables the phone to display the GPark soft key during a
call.
###0-Disabled,1-Enabled.
###The default value is 0.

Yealink SIP-T46S Specifications

General

Manual	Yes
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Voice codecs	CNG, G.711Mu, G.711a, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Lines quantity	16 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
AC adapter output voltage	5 V
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Volume control	Digital
Number of programmable keys	10
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	SIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	213 mm
Width	244 mm
Height	185 mm
Package depth	255 mm
Package width	274 mm
Package height	128 mm