BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE 20-BD5476-00
©
2017 BROADSOFT INC. PAGE 143 OF 150
call_park.group_enable = %FEATURE_BW_CALL_PARK%
###It enables or disables the phone to play a warning tone when a call is
parked against its line.
###0-Disabled,1-Enabled.
###The default value is 0.
call_park.park_ring = %FEATURE_BW_CALL_PARK%
###It enables or disables the phone to display a parked indicator when a
call is parked against its line.
###0-Disabled,1-Enabled.
###The default value is 0.
call_park.park_visual_notify_enable = %FEATURE_BW_CALL_PARK%
##########################################################################
#############
## Time
##
##########################################################################
#############
##It configures the time zone.For more available time zones, refer to Time
Zones on page 215.
##The default value is +8.
local_time.time_zone = %BWTIMEZONE-1%
##It configures the time zone name.For more available time zone names,
refer to Time Zones on page 215.
##The default time zone name is China(Beijing).
local_time.time_zone_name = %TIMEZONENAME%
local_time.ntp_server1 = %SNTP_SERVER_1%
local_time.ntp_server2 = %SNTP_SERVER_2%
##It configures the update interval (in seconds) when using the NTP
server.
##The default value is 1000.Integer from 15 to 86400
local_time.interval =
##It enables or disables daylight saving time (DST) feature.
##0-Disabled,1-Enabled,2-Automatic.
##The default value is 2.
local_time.summer_time =
##It configures the way DST works when DST feature is enabled.
##0-DST By Date ,1-DST By Week.
##The default value is 0.
local_time.dst_time_type =
##It configures the start time of the DST.
##Value formats are:Month/Day/Hour (for By Date),Month/ Day of Week/ Day
of Week Last in Month/ Hour of Day (for By Week)
##The default value is 1/1/0.
local_time.start_time =
##It configures the end time of the DST.
##Value formats are:Month/Day/Hour (for By Date),Month/ Day of Week/ Day
of Week Last in Month/ Hour of Day (for By Week)
##The default value is 12/31/23.
local_time.end_time =
##It configures the offset time (in minutes).
##The default value is blank.Integer from -300 to 300
local_time.offset_time =
##It configures the time format.0-12 Hour,1-24 Hour.
##The default value is 1.
To Next Page
Loading...
