Yealink SIP-T46S Configuration Guide

BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE 20-BD5476-00
©
2017 BROADSOFT INC. PAGE 56 OF 150
File Name CPE Kit Template File Name File Type Description
contact.xml contact.xml Static This file contains the contact
information in XML format.
blacklist.xml blacklist.xml Static This file contains the blacklist
contact information in XML format.
DialPlan.xml DialPlan.xml Static Specifies the dialing rules.
AutoDST.xml AutoDST.xml Static Rules set of the beginning and
end of daylight savings time.
TimeZoneAliasLabels_Y
ealink+<model>.properti
es
TimeZoneAliasLabels_Yealink-
<model>.properties
Time Zone
Alias
The Time Zone Alias file is a
BroadWorks Device Management
file used to map time zone
identifiers between BroadWorks
and Yealink phones. A Time Zone
Alias file is required for each
model.
WebItemsLevel.cfg WebItemsLevel.cfg Static This file defines the access level
of configuration items in cfg
format.
CallFailed.xml Call Failed.xml Static This file defines the soft key of the
call failed state.
CallIn.xml CallIn.xml Static This file defines the incoming call
state.
Connecting.xml Connecting.xml Static This file defines the soft key of
connecting state.
Dialing.xml Dialing.xml Static This file defines the soft key of
dialing state.
favorite_setting.xml favorite_setting.xml static This file configures desired lists of
the Directory soft key.
Language files:
000.GUI.English.lang
000.GUI.English.lang(Phone
Model)
Static This is the customized languages
file for English.
Ring.wav Ring.wav Static This is the ring tone in WAV
format.
RingBack.xml RingBack(<Phone Model>).xml Static This file defines the soft key of ring
back state.
super_search.xml super_search.xml Static This file configures the search
source list in dialing.
Talking.xml Talking(<Phone Model>).xml Static This file defines the soft key of
talking state.
The following table identifies other files that the Yealink T4xG IP Phone downloads from
the server or uploads to the server. These files are not provided in the CPE kit and must
be obtained from Yealink.
File Name File Type Description
x.x.x.x.rom Static Device firmware file.
xxx.GUI.<language>.lang Static Customized language files.
Browse to System → Resources → Identity/Device Profile Types → Files and
Authentication to add the files as described in the following subsections.

Yealink SIP-T46S Specifications

General

Manual	Yes
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Voice codecs	CNG, G.711Mu, G.711a, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Lines quantity	16 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
AC adapter output voltage	5 V
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Volume control	Digital
Number of programmable keys	10
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	SIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	213 mm
Width	244 mm
Height	185 mm
Package depth	255 mm
Package width	274 mm
Package height	128 mm